CL-W171-CU00SL-B-01
CL-W171-CU00SL-B-02CL-W171-CU00SL-B-03

Thermaltake Pacific M-Pro G1/4 PETG 16mm Fitting Kit- Chrome

82,90 (included VAT)

◆ Tt LCS Certified.

◆ Remarkable Expansion.

In stock

SKU: CL-W171-CU00SL-B Categories: , ,

Product Description

Thermaltake Pacific M-Pro G1/4 PETG 16mm Fitting Kit- Chrome
Thermaltake Pacific M-Pro G1/4 PETG 16mm Fitting Kit is composed of two G1/4 PETG Tube 90-Degree compressions 16mm OD and six Pacific M-Pro G1/4 PETG 16mm OD compressions, all chrome plated. Together, these provide exceptional performance, unrivalled reliability, and styling for simple entry level custom loop.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Thermaltake Pacific G1/4 PETG Tube 90-Degree Dual Compression 16mm OD – Chrome
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in chrome coatings, take every detail seriously.
Thermaltake Pacific M-Pro G1/4 PETG 16mm OD Compression – Chrome
Featuring chrome plating, the Pacific M-Pro G1/4 PETG 16mm OD Compression comes with special triple O-ring leak-free design and patented structure for ultimate loop management.
Remarkable Expansion
Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.

Additional Information

Weight .54 kg
Dimensions 11.2 x 12.2 x 4.4 cm

Reviews

There are no reviews yet.

Be the first to review “Thermaltake Pacific M-Pro G1/4 PETG 16mm Fitting Kit- Chrome”

Your email address will not be published. Required fields are marked *