The Thermaltake Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock is a transparent waterblock designed for the latest ASUS ROG STRIX RTX 3070 graphic cards. It supports TT RGB PLUS software and displays 1.68M RGB lighting effects that help your GPU stand out from other builds.
Exclusive LED Strip Design
Controlled by the patented TT RGB PLUS Software and the app, the built-in 12 addressable LEDs feature great light coverage.
High Water Flow Design
Pacific V-RTX 3070 covers all GPU’s heat source, ensuring stable and reliable cooling performance even during overclocking. The waterblock also covers the entire PCB so no components are exposed, limiting the possible damage while handling the GPU.
Mirror-Finished CU Base
Pacific V-RTX 3070 Plus (ASUS ROG) GPU Waterblock has a copper base with a mirror finished anti-corrosive nickel plating, which is easier for users to spread out the thermal compound and provides exceptional heat transfer while keeping the water block looking as good as new.
High Quality Aluminum Backplate
The aluminum backplate can cover the entire GPU from the back, preventing the PCB board from being twisted or bent.
Unique Micro-Channel Structure
Featuring a compact form factor with 0.5mm micro-channel fin construction guarantees optimal clearance and extreme heat dissipation.
Tt LCS Certified
Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiast standards that a true LCS chassis should hold to.
TT RGB PLUS
TT RGB PLUS Ecosystem is the intelligent lighting system for PCs that combines the most advanced addressable LED lighting with Thermaltake’s patented TT RGB PLUS Software.
For desktop: Requires TT RGB PLUS Software 1.1.5 version or later.
For iOS: Requires iOS 10.0 or later.
For Android: Requires Android 6.0.0 or later with screen resolution 1920 x 1080.
Works with Razer Chroma
All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem. Users who have installed both the TT RGB PLUS Software and Razer Synapse 3 can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and gaming gear! From cooldown timers, health bars, and flashy ultimate indicators, to subtle ambient lighting that sets the perfect mood for each game, Razer Chroma provides an experience that transcends the screen and into your full setup, for a truly immersive experience. *At least one Razer Chroma product and one TT RGB PLUS product is required for synchronization.
All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to control the lights or fan speeds by talking to the Alexa-enabled device. With the support of Amazon Alexa, TT RGB PLUS products also offer an additional visual cue for checking current weather condition in your location or anywhere in the world. All you have to do is simply starting the sentence with “Alexa, tell Thermaltake”, then the lighting color will correspond to the weather condition in the location.
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup
It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Fill the reservoir to the top as it will prevent air from going into the pump
If necessary tilt the system slightly from side to side to bleed the air out of the loop.
Place some paper towels under fittings and joining points to test for leaks.
Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.